202106-07

202106-07

202106-07

202106-07

About the common problem of automatic lock screw machine

The length of the screw is greater than 1.2 times or more of the cap diameter, and a blowing feed can be used. If this condition cannot be met, it can only be blown up. Of course, not all screws are suitable for blowing. (Please consult the business

202106-07

Automatic screw machine principle

The screws are automatically tightened by the rotation power portion and the screw introduction portion. The improvement of screws is commonly used with blown and adsorption. In general, blowing is continuous due to work, without the need to move bac

202106-07

Automatic lock screw machine in the fan industry

Automatic lock screw machine, configuring 6 cakes, mainly because the product needs to be placed three paper gaskets before trew the screw, place the workpiece plus the paper gasket time exceed the automatic lock screw machine screw the screw time, s

202106-07

Automatic lock screw machine manufacturers tell you the requirements for automatic lock screws to screws

The birth of the automatic screwing machine is the development requirements of the market. It is the basic factor in automatic development through equipment to improve efficiency. Usually, the hand-held lock screw machine is locked 50 screws per minu

202106-07

Automatic lock screw equipment price and performance

Automatic lock screw equipment is non-standard equipment, industry-specific models, need to be designed according to product characteristics and production requirements, each industry and different manufacturers have different products, and all produ