Automatic lock screw machine in the fan industry

The fan has a ceiling fan, a sector fan, and a different product requires different automatic lock screws, which use rotation and desktop automatic lock screws.

Ceiling fan rotation automatic lock screw machine

The product is a ceiling fan motor, which is fastened with a left hexagonal screw. The screw has a gasket, the circular massage is 12mm, the length of the screw is 15mm.

Here, 6-axis turntable automatic lock screw machine is used, and 6 cakes are configured, mainly because the product needs to be placed three paper gaskets before trew the screw, place the workpiece plus the paper gasket time exceeds the automatic lock screw machine screwing screw Time, screwing 6 screws Time usually in 3 seconds, can be placed with doubles, and skilled in the later operation can be placed one person.

Fan lock screw machine

This production is a significant increase in the efficiency of the traditional manner, and the entire screw process is only 3 seconds. It only needs a simple pick-in product, the device automatically sends 6 screws, and is automatically screwed once, the turntable benefits are, can screw the screws, run water, no need to wait, significantly saves time

Taiwanese tablet-type automatic lock screw machine

A fan shaking head can arbitrarily adjust the fan shaking head angle adjuster to realize a variable range blowing air. Commonly used in land fans, industrial fans, etc.

The products have three screws to be fastened. In order to improve production efficiency, this double-station, double platform coordinate automatic lock screw machine.

Desktop automatic lock screw equipment advantages:

High efficiency: 3600-4000 screws around each hour, no waiting time;

Easy: 1 worker required for single equipment, just complete the upper and lower materials;

Reliability: Configure slip tooth, floating lock, leak lock detection function and automatically alarm, more than 20 hours a day;

Generality: For products that lock the same screw, simply replace the fixtures, lock different products, can be put into production by simple programming, which is very convenient for corporate organization production;

Good image: Intelligent automation equipment makes the company's production sights, establish a high-tech image of enterprises.

Provincial cost: Single people can operate efficiently, 1 person is equivalent to 3 efficiency;

20 products can be placed on the jig of a single platform, using a dual electrical batch, twisting 2 screws at the same time, can be multiplied, and the dual platform can realize the synchronization of the pick and discharge product, and the equipment is screwed, and the employee can be another A station is placed, and it saves time. Simple operation, employees only need to place the product, product fixture design science, easy to pick off the product.

Desktop lock screw machine detailed introduction

1. Mainly composed of screws automatic delivery systems, X-Y-Z mobile platforms, control systems and lockout systems;

2. Strong applicability, replace the product, just replace the rule, the device procedure is saved separately, and the corresponding program is adjusted;

3. Feeding is controlled by inductor, locking one, automatic feeding, no repeated feed phenomenon;

4. The slipping teeth does not feed: In the lockout project, the torque is not reached, the screw does not send, preventing the phenomenon of the junction;

5. Good stability, no card, even if bad leads, non-professional personnel can also solve the card material in a few seconds;

6. High efficiency, generally playing a screw in 1 second, do not have to grab the screw, just put the product to the equipment to operate the equipment;

7. Reduce 3 workers screw lock payment, realize automation production, reduce workers' labor intensity, and improve productivity;

8. The key part uses high-quality hardware materials and has special treatment, the electron raw device adopts imported to ensure zero failure of equipment.