Application of thread line rotating screw feeding arrangement on fully automatic screw locking machine:

Screw feeding arrangement with threaded thread rotating type. The circular barrel is equipped with a threaded thread type screw groove, which is driven by a motor to rotate the circular barrel. During the rotation process, the screws automatically slide into the groove and are sorted and arranged neatly. The screws follow the threaded thread groove to be sent out of the barrel in sequence and enter the straight track.

The feeding arrangement for threaded rotary screws can be processed into single or double outlet screws, but threaded threads are difficult to process and are generally processed using mold injection molding. On the one hand, mold injection molding is expensive, and on the other hand, there are too few applicable screw specifications. The feeding speed of the screw feeding arrangement with threaded wire rotation is slow, but the stability of the feeding is relatively good.

The sorting and conveying of screw feeding arrangement with thread line rotation can be applied to the whole row and transportation of various screws, such as mechanism screws, self tapping screws, etc.

The screw feeding arrangement of the thread line rotating type has relatively low resistance and arrangement noise to the screws.

The screw feeding arrangement of thread line rotation has long been used by Japanese automation companies on automatic screw machines, and some domestic automatic screw machines have been used, so the limitations of the arrangement have not been successful.

Rotating funnel type screw feeding arrangement, the cylindrical material bucket is fixed in place, and the rotating disk at the bottom is rotated by a motor. The groove on the turntable is funnel-shaped, and screws are hung during rotation and rotated to the entrance of the screw slide. The sorted screws in the funnel slide slide slide into the slide, and the slide directly transports the screws to the screw locking position.

The rotating funnel screw feeding arrangement can be processed into single outlet or double outlet for transporting screws. Assuming that the feeding speed is slower when processed into double outlet, two screws can be transported together.

The sorting and conveying of the rotating funnel screw feeding arrangement can be applied to the assembly and transportation of various screws, such as mechanism screws, self tapping screws, flat washer screws, irregular screws, etc.

The screw feeding arrangement of the rotating funnel type has less resistance to screws than that of the vibrating disc type, but is larger than that of the sliding groove push type, and the arrangement noise is relatively small.

The rotating funnel type screw feeding arrangement was popular in Japan in the 1990s and was applied to automatic locking screw machines. However, by the late 1990s, its use had decreased significantly.

The rotating screw feeding arrangement of the car is similar to the structure of a water wheel, using an electric motor to rotate the turntable. The screw slot spoon on the turntable picks up the screws, which may slide from the turntable base or the surrounding surface to the entrance of the straight track. The straight track uses the method of crossing a single wooden bridge or straight transportation to sort and transport the screws.

The rotating screw feeding arrangement of the water wheel is only suitable for transporting screws through a single outlet, and the capacity of the material box is not large, so screws need to be added repeatedly.

The sorting and conveying of the rotating screw feeding arrangement of the water wheel is only applicable to screws with a diameter of 1.0mm to 3mm, and the conveying speed is slow, with less than 60 screws per minute.