Introduction of automatic lock screw machine material

Threaded line rotary screws are arranged on the fully automatic lock screw machine:

Threaded wire rotary screws arrangement, the drum-shaped barrel is a threaded wire screw slot, rotating using a motor shares, and the screw is automatically slipped into the chute and sorted in the rotation process. Regular, screws follow the threaded wire slide sequentially, and enter the straight track.

Threaded wire rotary screws can be machined to process the single export perhaps the double exit transport screw, but the thread is more difficult to process, generally use mold injection processing, the mold injection molding, the cost is higher, and there is too little screw specification for the other hand. . Threaded line rotary screws are slow, but the stability of the feeding is better.

The sorting and transmission of threaded wire rotary screws can be applied to the entire and transport of various screws, such as mechanism screws, self-tapping screws, and the like.

Threaded wire rotating screws arrangement, the noise of the reactive and arrangement of the screws is smaller.

Threaded line rotary screws are the earliest Japan automation company to be used on automatic screws, and there are some automatic screws in China. Therefore, the limitations are not successful.

Rotating funnel screws arrangement, the drum-shaped hood is fixed, the bottom rotating disk is rotated by motor stocks, and the slide on the turntable is funnel, and the screw is suspended during the rotation process, rotate to the screw slide At the entrance, the funnel slotted screw slides into the slide, the slide directly passes the screw directly to the lock screw portion.

Rotating funnel screws can be machined to process the single export perhaps a double exit transport screw, assuming that the machining is slow, but two screws can be transported together.

Sorting and transfer of rotating funnel screws can be applied to the entire and transport of various screws, such as mechanism screws, self-tapping screws, flat pad, shaped screws, etc.

The rotary funnel screw is arranged, and the contravement of the screw is small, but it is much smaller than the slot extension, and the noise ratio is small.

The rotary funnel-type screw is arranged in Japan in the 1990s, which is used in the automatic lock-locking screw machine, and it has been used in the late 1990s.

The car rotary screw is arranged. It is the structure of the watermaster. It is used to rotate the motor unit rotation. The screw tubes on the turntable is screwdriver. The base of the turntable may be surrounded by the surrounding surface, the linear track is selected. The way to pass the wooden bridge or the line transport method is sorted and transmitted.

The water-car rotating screw is arranged only for the single exit to transport the screw, and the volumetric volume is not large, and it is necessary to add screws.

The sorting and transmission of the water-rotating screw arrangement is only applicable to the φ1.0-φ3 screws, and the transmission speed is slow 60 or less.