Cleaning and maintenance of automatic lock screw machine

Precaution modification

1 Shooting should adhere to the sliding of the electric batch nose in the electric batch mouth, otherwise it will make the screws not easy to enter the electron batch nose, affect the use of the machine.

2 Do not be bent screw transport tube, otherwise the screw will be caught in the bend during the screw delivery process.

3 must wait for the electric batch torsion to the set torque, the electric batch proceeds to the electric batch, otherwise the machine will not move, transport a screw to the electric batch nose to be locked.

4 If the machine did not send a screw to the electric batch nose mouth to be locked, repeatedly played a locking screw, or manually sent a screw button in a manually, allowing the machine to send a screw to the electric batch nose to be locked.

5 The air pressure is not adjustable, otherwise only the wear velocity of the electric batch nose.

6 Trajectory vibration is not good, otherwise the screws are easily extruded on the screw trajectory, affecting the stability of the machine.

6 cleaning and maintenance modification

1. Timed cleaning the screw warehouse, ensuring the net cleaning, and advocates the slag in the silo with high pressure gas.

2. Timed cleaning screw trajectory, and ensure that the screws run smoothly within the trajectory.

3, the timing cleaning nail system, ensuring that the nail system is running smoothly and advocates timing to properly add some grease in motion parts.

4. Timed cleaning the outer surface outside the chassis.

5. Please turn off the power when you are not used.