Operation Guide for Automatic Screw Locking Machine

The operation procedure of the automatic screw locking machine is more than that of the hand-held screw machine, because its degree of automation is higher, and the function is more than that of the hand-held screw machine. The operation is not messy, only the introduction of the dual-axis automatic screw machine During the operation process, this method can be used for multi-axis fixed automatic locking screw machines.

Multi-axis locking screw machine function description

1. Automatic feeding

2. Incoming inspection

3. Material shortage alarm

4. Smart counting

5. Automatic manual exchange

6. Automatic lock payment

Multi-axis locking screw machine operating instructions

1. Connect the power and air source;

2.Launch the power switch button, set the automatic-manual button to automatic,

3. Place the product to the lock station,

4. Press the manual start buttons on both ends at the same time,

5. Take out the locked product,

6. Repeat step 3.4.5.

To stop, just activate the stop button.

If you hear an alarm, it indicates that the screws in the hopper have been used up, you need to activate the stop button, open the top cover of the feeder, and put in the screwdriver of the corresponding specification.

Introduction of manual function of automatic locking screw machine

Automatic lock screw machine operation

In daily production, the use of the lock screw machine can complete the screw lock payment by simply starting the automatic. The manual function is mainly used during the debugging period. Most products will use the fixture to fix the product's position before selecting the lock screw to lock the screw. Improve locking power. Normally, this operation is completed by our company. If customers do not require our company to manufacture product fixtures, they can debug by themselves. Manual operations are not messy,

1. Set automatic-manual to manual;

2.Place the fixture with the product and activate the manual down button;

3. Debug the position of the fixture and the electric screwdriver to ensure that the product screw holes on the electric screwdriver and the fixture match.

4. Launch manual upward;

5. Repeat the test until it is accurately located.

After confirming the position of the fixture, we can adjust the automatic-manual button to automatic, and it can be used in daily production.

Daily maintenance of multi-axis locking screw machine

1. Keep it clean and clean. When not in use, use an oily cloth to scrub as much as possible, and as little water as possible

2. Don't have scraps and other things to stay

3. Keep ventilated and boring

4. Regularly perform plug-in ventilation to check performance

5. Frequently check to prevent rodent damage to tracheal wires, which will affect future use

Because of the intelligent and refined structure, if you have any application problems or need to be repaired, please contact us in time and do not disassemble or install it yourself.