The necessary knowledge of automatic screw machine manufacturers to maintain the screw machine

The screw machine will encounter many questions in the process of use, on the one hand, the screw machine equipment question, on the other hand, the screw question, of course, there are also some operational errors. Assuming that the screw machine equipment of the automatic screw machine manufacturer is repaired, it will seriously affect the production of the enterprise and the repair cost is very high, then how do we maintain the good screw machine equipment and reduce the repair cost. Let us understand:

In addition to the quality of the automatic locking screw machine equipment itself, the quality of the screws should also be considered for the original. Generally speaking, the screw must ensure that the automatic locking screw equipment is unblocked, so the first thing is that there should be no miscellaneous nails, broken nails and other elements; because miscellaneous nails and broken nails will cause the automatic locking screw machine to have problems with the machine, and then affect the unblocking of the production line. The output power and the possibility of damage to the automatic screw-locking machine. At this time, 100% good-quality screws are needed to cooperate. Assuming that the good screw is used in the automatic locking screw machine, there is no bad phenomenon, then it means that the automatic locking screw machine is good.

Questions about the machine itself, such as the information used, the technology and the brand used by the electronic parts, are not very big questions, because the powerful automatic screw machine manufacturers can deal with this question, here We don't talk about it. I don't need to explain the card machine, we must all understand it, and the so-called floating teeth and flower heads are composed of two elements. The first is the question of the structure of its own plan. The second is that the screw machine manufacturer enlarges all the screw machine channels to deal with the above-mentioned special-shaped screws, including the electric screwdriver nose. If the inner diameter of the electric screwdriver nose is too large, it is the biggest factor that causes floating teeth and flower heads. !

Three common failures of automatic screw machine manufacturers and lock screw machines:

The first point: Assuming that slipping is found during the operation of the automatic locking screw machine, you need to check whether the torque of the electric screw is suitable for the current locking screw torque plan. It is recommended to test the torque from the beginning with a torque meter. At the same time, check whether the size, specification, and quality of the screws are normal.

The second point: Assuming that the automatic locking screw machine has a phenomenon of missing nails, then it may be a problem with the screw feeder or the screw sensor. At this point, you need to check whether the screw supplier has delivered screws, take the screws by hand to see if they are working properly, and investigate whether the screw sensor is on. If there are screws that are not on, it indicates an abnormal induction.

The third point: When you find that the automatic locking screw machine has a floating lock phenomenon, you need to check whether the determined height in the process setting in the program has reached the screw training determined position and whether the locking speed parameter setting is accurate. At the same time, it is also necessary to check whether the locked product is defective.