The fully automatic screw locking machine has more operating procedures than the handheld screw locking machine because of its higher degree of automation and more functions than the handheld screw locking machine The operation is not complicated. Here we only need to introduce the operation process of the dual axis automatic screw locking machine. This method can be used for multi axis fixed automatic screw locking machines

Function Description of Multi axis Locking Screw Machine

1. Automatic feeding

2. Incoming material inspection

3. Shortage alarm

4. Intelligent counting

5. Automatic and manual exchange

6. Automatic locking payment

Operating instructions for multi axis locking screw machine

1. Connect the power and gas source;

2. Turn on the power switch button and set the automatic manual button to automatic,

3. Place the product at the locking station,

4. Press both manual start buttons at the same time,

5. Take out the locked product,

6. Repeat steps 3.4.5

To abort, simply press the abort button

If you hear an alarm prompt, it indicates that the screws in the hopper have been used up. You need to activate the stop button, remove the top cover of the feeder, and put in the corresponding screw machine

Introduction to manual function of automatic screw locking machine

Automatic screw locking machine operation

In daily production, using a screw locking machine only requires starting the automatic function to complete screw locking. The manual function is mainly used during debugging. Most products use fixtures to fix the orientation of the product and improve the locking power before selecting the screw locking machine Normally, this assignment is completed by our company If the customer does not require our company to manufacture product fixtures, they can debug them themselves Manual homework is not messy,

1. Adjust the automatic manual mode to manual mode;

2. Place the fixture with the product and activate the manual down button;

3. Adjust the orientation of the fixture and electric screwdriver to ensure that the screw holes on the electric screwdriver and fixture match

4. Activate manual upward movement;

5. Repeat the test until precise positioning is achieved

Once the fixture orientation is determined, we can adjust the automatic manual button to automatic and apply it to daily production

Daily maintenance of multi axis locking screw machine

1. Keep clean and tidy. When not in use, use an oily cloth as much as possible for scrubbing, and try to avoid getting wet as much as possible

2. Do not leave any broken materials or other things lingering

3. Keep it ventilated and dry

4. Regularly plug in and ventilate, check performance

5. Regularly check and prevent rodents from damaging the trachea and electrical wires, which may affect future use

Due to its intelligent and refined structure, if there are any application problems or repair needs, please contact us in a timely manner and do not disassemble or assemble it yourself