During the use of the screw machine, there may be many questions, on the one hand, about the screw machine equipment, on the other hand, about the screws, and of course, some operational errors. Assuming that the screw machine equipment of the automatic screw machine manufacturer is repaired, it will seriously affect the production of the enterprise and the repair cost will be high. So, how can we maintain the screw machine equipment well and reduce the repair cost. Let's take a look below:

In addition to the quality issues with the automatic screw locking machine equipment itself, the original also needs to consider the quality of the screws. Generally speaking, in order to ensure that the automatic locking screw equipment is unblocked, there should be no impurities or broken screws as the first priority; Because miscellaneous and damaged screws can cause problems with the automatic screw locking machine, which can affect the smooth operation of the production line, impact production power, and potentially cause damage to the machine. At this point, it is necessary to cooperate with 100% high-quality screws. If there are no defects in the use of high-quality screws in automatic screw locking machines, then it means that the automatic screw locking machine is good.

The questions about the machine itself, such as those caused by the information, technology, and brand of electronic components used, are not significant questions because powerful automatic screw machine manufacturers can handle them. We will not discuss them here. I don't need to explain the card machine, I believe we all understand, and the so-called floating teeth and flower heads consist of two elements. The first is a structural issue with the plan itself, and the second is that the screw machine manufacturer has enlarged all screw machine channels to handle the above-mentioned irregular screws, including the electric screwdriver nose nozzle. The large inner diameter of the electric screwdriver nose nozzle is a major factor causing floating teeth and flower heads!

Three common faults of automatic screw machine manufacturers locking screw machines:

Firstly, assuming that there is tooth slippage during the operation of the automatic screw locking machine, you need to check whether the torque of the electric screwdriver is suitable for the current screw locking torque plan. It is recommended to use a torque meter to test the torque from scratch. Together, check if the screw size, specifications, and quality are normal.

Secondly, if there is a missing screw phenomenon in the automatic screw locking machine, it is possible that there is a problem with the screw feeder or screw sensor. At this point, you need to check if the screw supplier has sent screws, take the screws by hand to see if they are working properly, and investigate if the screw sensor light is on. If any screws are not on, it indicates that the sensing is abnormal.

Thirdly, when you notice a floating lock phenomenon in the automatic screw locking machine, you need to check whether the determined height in the process settings of the program has reached the determined position of the screw, and whether the locking speed parameter settings are accurate. Also, it is necessary to check whether the locked products have defects.